WINDOWS NETWORKING COMMANDS
Certainly! Here are some common networking commands that you can use in Windows:
1.ipconfig: This command displays the TCP/IP configuration for all network adapters on your system. It shows information like IP address, subnet mask, and default gateway.
ipconfig
2.ping: Ping is used to test the connectivity between two devices on a network. It sends ICMP echo request packets to the target and waits for a response.
ping [hostname or IP address]
3.tracert: Tracert is used to trace the route that packets take to reach a destination. It shows all the hops (routers) between the source and destination.
tracert [hostname or IP address]
4.nslookup: Nslookup is used to query DNS servers to retrieve DNS records like IP addresses, MX records,
etc.
nslookup [hostname]
5.netstat: Netstat displays active TCP connections, listening ports, and other network statistics.
netstat -a
6.arp: Arp displays and modifies the ARP cache, which maps IP addresses to MAC addresses on a local network.
arp -a
7.route: Route displays and modifies the local IP routing table.
route print
8.ipconfig /flushdns: This command flushes the DNS resolver cache, which can help resolve DNS-related issues.
ipconfig /flushdns
9.ipconfig /release: This command releases the IP address obtained by DHCP for all network adapters.
ipconfig /release
10.ipconfig /renew: This command renews the IP address obtained by DHCP for all network adapters.
ipconfig /renew
These commands should help you diagnose and troubleshoot network-related issues on your Windows system.